STUDIO DSM follows and develops more than 20 years the technology of die-casting rotors with capillary injection into third plate.

A long experience of several years has led us to study and to plan the best moulds. When prints were passing from equipment to a print of up to 6/8 prints, it completes with independent hydraulic compensation of the sheets for each rotor, thermoregulation looked in each zone of the die and interchangeability of the heights packed with the mould in the machine.

In these years we have planned a lot of equipment for different rotors typology with external diameter at 40 mm up to 170 mm and heights with 20 up to 300 mm.